ADD TO CART
BUY IT NOW
House dust is made up of various substances such as lint, pollen, dust mites, dirt, and dandruff from humans and animals. The majority of these are microscopic particles that can't easily be seen with the naked eye. Mites feed on house dust such as dandruff, and their bodies and feces become allergens.
Mite sensor (House dust sensor) lets you know when dirt is detected by the color of the lamp.
Mite Sensor (House dust sensor) detects dust particles as small as 20 microns and adjusts the travel speed and best cleaning route to take based on dust volume.
Working in tandem, ultrasonic and infrared sensors provide accurate detection of obstacles such as furniture, walls, stairs, and corners to ensure thorough cleaning.
The cleaner gets as close as possible to thoroughly clean up to edges.
*Detection may not be possible depending on the environment and color of obstacles and the materials they are made of.
The infrared sensor reliably pinpoints distance and mainly contributes to preventing the cleaner from hitting walls.
The ultrasonic sensors enable detection of black objects and transparent objects that are not easily detected by the infrared sensor.
These sensors measure the distance between the floor and bottom of the cleaner, enabling it to move over surface-level differences of approx. 20 mm* while preventing it from falling.
*The sensors may not detect steps less than 10 cm in height and floor color and pattern may inhibit operation.
The side brush is located near the approx. 136 mm extra-wide suction inlet. It moves collected dirt to the V-shaped brush in the center of the unit which then moves it to the suction inlet. The two brushes work together to provide powerful, efficient dirt collection.
With a width of just 249 mm. It can easily get into narrow spaces to clean between furniture or under sofas.
The triangular shapes enables the cleaner to get into corners and recesses and rotate left/right to clean up hard-to-remove dirt.
The cleaner can rotate in square areas, so it can smoothly change direction even in narrow spaces.
Operating noise level is only 50dB, approx. 20% lower* than during automatic operation, for quiet cleaning. *Compared with the Automatic mode of the MC-RSC10.
This mode combines two vacuuming paths to efficiently clean the entire floor. Use the Round path to clean corners and wall edges and the Random to clean the center of the room.
The cleaner moves outwards from the start position in a spiral curve with a diameter of approx 1.5 m. It then spirals inwards and returns to the center.
The dust box can be removed from the top with one hand for easy disposal of dust, and it can be washed whole with water.
The brush can be washed with water, and it's easy to put in and remove.
With a 1,100 times charge cycle, the battery has a long life.
After cleaning, the unit automatically returns to the battery charger.